Products

Our extensive inventory includes fiberglass reinforcements; epoxy, polyester, and vinylester resins; carbon fiber; mold releases; fillers; pigments and more.

Vacuum Bagging

Breather N-4 4 oz./yd2 x 60"
Breather N-4 4 oz./yd2 x 60" Airweave N-4 is a non-woven polyester breather for low pressure cures. It conforms well to your part. Airweave N-4 can be slit for breathing or bleeding. It can be used as a bleeder at any pressure. The bleeder absorbs the excess resin. Use with a release film. Maximum use temperature: 400° F (204° C).

Nylon Vacuum Bagging Film .0015 x 60"
Nylon Vacuum Bagging Film .0015 x 60" Econolon nylon vacuum bagging film has good strength and elongation. It has great drapeability and works with all resin systmes (except phenolic). This film is ideal for room temperature applications but will also take higher temperatures. Elongation: 350%. Maximum use temperature: 300° F (149° C).

Peel Ply x 60" Econoply J
Peel Ply x 60" Econoply J Econoply J is a polyester release peel ply designed for less critcal applications. It is designed for low temperature commercial applications where cost saving is the primary concern. Econoply J works well with most room temperature and low temperature curing resins and is ideally suited for marine, transportation, recreation and the wind power industries. Weight : 1.6 oz./yd2. Thickness: .003 inches (.008 cm). Maximum service temperature: 250° F (121° C). Approximately 100 yards per roll.

Vacuum Bagging Sealant Tape 1/8" x 1/2" x 25'
Vacuum Bagging Sealant Tape 1/8" x 1/2" x 25' This sealant tape seals easily to nylon film. It sticks to the vacuum bag yet removes cleanly from metal or composite tools. This tape is designed for compaction and debulking applications. Maximum service temperature 225° F (107° C)