Products

Our extensive inventory includes fiberglass reinforcements; epoxy, polyester, and vinylester resins; carbon fiber; mold releases; fillers; pigments and more.

Adhesives

Plio Grip 100ML
Plio Grip 100ML This PLIOGRIP system is a high performance, two-component polyurethane adhesive packaged in side-by-side cartridges. It is resistant to exposure to elevated temperatures, moisture, fuel, most solvents and chemicals. PLIOGRIP 7779/100 has a 9 minute working time which allows ample time for application and bonding. It is easy to sand in about an hour without heat. It is dispensed using a hand-held, cartridge gun.

System Three Quick Cure
System Three Quick Cure Quick Cure, the “five-minute” epoxy, is a two component, solvent-free epoxy/polymercaptan adhesive. When mixed in a 1:1 volume ratio, this product will cure in five minutes, even in lower temperatures. Use for installing bungs, repairing missed staple holes prior to fiber-glassing, “tack welding” wood, and for those other glue jobs which require a small amount and a fast cure. It is highly water-resistant but not waterproof. Do not use below the water line unless protected by an overcoating of System Three General Purpose Epoxy.

System Three T-88
System Three T-88 For well over 30 years, T-88 has been the most widely used structural adhesive for marine, homebuilt aircraft, and general wood working use in the United States. Mixed at a 1:1 ratio by volume, T-88 will cure at temperatures as low as 35°F. T-88 cures with excellent impact resistance and will cure in high humidity. Long pot life allows up to 60 minutes working time. Allow to cure overnight.